 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20797 rev. A 11/06 63CPQ100PBF SCHOTTKY RECTIFIER 60 Amp IF(AV) = 60Amp VR = 100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 30 Apk, TJ= 125C range Description/ Features Units A V A V The 63CPQ100PBF center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Values 60 100 2200 0.64 (per leg) - 55 to 175 C Case Styles Base Common Cathode 2 1 3 2 Anode 1 Anode 2 Common Cathode TO-247AC www.irf.com 1 63CPQ100PBF Bulletin PD-20797 rev. A 11/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 63CPQ100PBF 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) * See Fig. 7 63CPQ Units 30 60 2200 410 15 1 A mJ A A Conditions 50% duty cycle @ TC = 153C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5s Sine or 3s Rect. pulse TJ = 25 C, IAS = 1 Amps, L = 30 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 63CPQ Units 0.77 0.92 0.64 0.76 0.3 25 0.38 5.75 1300 7.5 10000 V V V V mA mA V mW Conditions @ 30A @ 60A @ 30A @ 60A TJ = 25 C TJ = 125 C TJ = TJ max. TJ = 25 C TJ = 125 C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (1) Pulse Width < 300s, Duty Cycle <2% dv/dt Max. Voltage Rate of Change V/ s (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range to Case (Per Leg) * See Fig. 4 RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T Mounting Torque Case Style Marking Device Min. Max. 0.25 6 (0.21) 6 (5) 12 (10) 0.4 C/W DC operation 63CPQ Units -55 to 175 -55 to 175 0.8 C C Conditions RthJC Max. Thermal Resistance Junction C/W DC operation C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) TO-247AC(TO-3P) JEDEC 63CPQ100 2 www.irf.com 63CPQ100PBF Bulletin PD-20797 rev. A 11/06 1000 1000 100 Reverse Current - IR (mA) T J = 175C 150C 125C 100C 75C 10 1 0.1 0.01 0.001 0 50C 25C 100 Instantaneous Forward Current - IF (A) 20 40 60 80 100 TJ = 175C TJ = 125C TJ = 25C Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 10000 Junction Capacitance - CT (pF) 10 T = 25C J 1000 1 0 0.3 0.6 0.9 1.2 Forward Voltage Drop - VFM (V) 1.5 100 0 20 40 60 80 100 120 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Max. Forward Voltage Drop Characteristics 1 Thermal Impedance ZthJC (C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM 0.1 t1 t2 Notes: Single Pulse (Thermal Resistance) 1. Duty factor D = t1 / t2 2. Peak T J = P DM x Z thJC + T C 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics www.irf.com 3 63CPQ100PBF Bulletin PD-20797 rev. A 11/06 180 Allowable Case Temperature - (C) 30 Average Power Loss - (Watts) 170 DC 25 20 15 10 5 0 0 160 150 140 Square wave (D = 0.50) 80% Rated V applied R D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC 130 see note (2) 120 0 10 20 30 40 50 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - IFSM (A) 10 20 30 40 50 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics 10000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 + DUT IR P460 F R = 25 ohm g Vd = 25 Volt CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 63CPQ100PBF Bulletin PD-20797 rev. A 11/06 Outline Table Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 63CPQ100 WITH ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN ASSEMBLY LINE "H" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 63CPQ100 P035H 56 57 DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H www.irf.com 5 63CPQ100PBF Bulletin PD-20797 rev. A 11/06 Ordering Information Table Device Code 63 1 C 2 P 3 Q 4 100 PbF 5 6 1 2 3 4 5 6 - Current Rating (60A) Circuit Configuration C = Common Cathode Package P = TO-247 Schottky "Q" Series Voltage Code none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity : 25 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/06 6 www.irf.com |
Price & Availability of 63CPQ100PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |